polished timber floors

The Different Kinds of Timber Floor Polishing Treatments Explained

There are a variety of floor polishing stains and finishes accessible for sealing, staining and protecting your timber floorboards. Selecting the right lumber finish and polish is an important first action and the professionals at Nationwide Flooring Sanding will be able to assist you in informing about the finest finish for your property. Some elements to consider when exploring available floor polishing finishes are:

  • The use and traffic levels of the place
  • The on-going care that’s needed
  • The level of gloss you want in a floor polishing and end
  • The odour of the finish or blemish and your residing arrangements although it is applied

Waterborne Finish

Also called water-based, the waterborne finish is a blend of resins, plasticizers and water, once applied and cured, the water evaporates whilst the solvents blend to create a strong, permanent and water-resistant film over the flooring.

The characteristics of the water-borne finish make it the most feasible choice for most timber floorboards in home or business properties. These useful characteristics are:

Characteristics of Water-borne Finish:

  • Hottest finish
  • Proof and permanent
  • Minimum smell during application
  • Matt and gloss finishes accessible
  • Enhances colour of the lumber and darkens with time
  • Significantly reduces the danger of side bonding
  • Number of jackets required
  • Dries in about half of per day
  • Non-toxic and environmentally-friendly

National Floor Sanding recommends the waterborne finish for anyone that wish to continue living or employed in the premises during the floor polishing and end application.

Polished timber floors

Oil – Based Finish

The conventional oil – based finish uses a combination of synthetic resins with tung or linseed oil to realize possibly the most durable finish for wooden floorboards of all floor polishing and finishes available.

Because of the longer drying time, oil-based finishes frequently attain a softer, glossier finish as they stage further throughout the drying method.

Features of Oil-Based End:

  • Resistant and permanent
  • Cheaper than waterborne finish
  • Needs fewer coats than waterborne finishes
  • Broadly available finish
  • Ambers over time leaving a warm finish
  • Adaptable and improbable to edge bond panels
  • Dries in approximately two to five times
  • Average to strong odour

National Floor Sanding recommends oil-based finishes for those wishing to reach a very smooth and glistening floor polishing finish.

Solvent Borne Polyurethane Finish

Solvent borne polyurethane finishes attain a solid, tough finish with a higher resistance to scratches and dings. The finish is expected to darker over time, once employed. The threat of edge binding is higher due to the inflexibility of the complete and the smell is quite strong, requiring residents to vacate premises during and for a few times after, the program.

Features of Solvent Borne Polyurethane Finish:

  • Provides harder finish that additional oil or water finishes
  • Higher resistance to abrasions, scrapes and slashes
  • Reduced maintenance needed
  • Shine ranges from medium to high
  • Usually darkens with time
  • Very strong odour

National Floor Sanding advocates solvent-borne polyurethane finishes for those that demand very high resistance to abrasions or scratches and are not worried about strong odours whilst floor polishing and drying occurs.

Polished Timber Floors

Composite Finishes

Composite finishes are a mix of oil – based and solvent polyurethane finishes, joined to create a complete using a great resistance to scrapes and abrasions. Throughout the application process, as the finish dries over two or three days the odour of composite finishes is powerful but will disappear.

Features of Composite Finishes:

  • Complete darkens with time
  • Unlikely to edge bond boards
  • Finish offers a subdued, satin to semi-gloss finish
  • Very good odour
  • Dries in about 2-3 times

National Floor Sanding recommends the composite finish for people who wish an understated satin to semi-gloss flooring polishing finish for their floor mats.

For further floor polishing advice or to enquirer regarding your floor polishing undertaking, contact our competent team at National Floor Sanding today via the form on this site. You will be given a no-duty free quote on your project and an impartial business buyer’s information with useful suggestions and guidance on having your flooring polishing project expertly completed.
Home

Floor Sanding Sydney | Floor Polishing Sydney | Floor Restoration Sydney | Wood Floor Sanding Sydney | Wood Floor Polishing Sydney | Sydney Floor Sanders | Sydney Floor Polishers | Floor Sanding and Polishing Sydney | Sydney Floor Sanders | Sydney Floor Polishers | Floor Sanding Service | Floor Sanding Sydney | Timber Floor Polishing | Commercial Floor Sanding Sydney | Floor Polishing Sydney | Floor Sanding Northern Beaches | Floor Sanding North Shore | Floor Sanding Eastern Suburbs | Floor Sanding Inner West | Floor Sanding Bondi | Floor Sanding Manly | floor sanding Chatswood | floor sanding Hornsby | floor sanding Cronulla | floor sanding and polishing | floor sanding cost | floor polishing cost | floor sanding quote | floor sanding prices | floor polishing quote | floor polishing service | Sydney floor polishing | floor restoration service | Sydney floor restoration | floor sanding quotes | floor polishing quotes Sydney | floor sanding and polishing

Sitemap